Intertek offers a comprehensive suite of Notified Body services in support of compliance to the EU Construction Products Regulation No 305/2011
The Construction Products Regulation (CPR) No 305/2011, is intended to make products arriving in any European Union country safe to use and install. The regulation, repeals the Construction Products Directive (CPD) No 89/106/EEC.
To sell products within the EU, it is mandatory to apply the CE mark showing products comply with all applicable Directives such as the CPR, EMC, and the Low Voltage Directive (LVD). The CPR has 4 levels of product verification that start at self-declaration (System 4) and end in product validation by a Notified Body (System 1+, System 1 and System 2+).
As a Notified Body in the EU, Intertek's scope covers products that require the highest category of validation - (AVCP System 1) which must involve the independent expertise of a Notified Body, and an FPC (Factory Production Control) audit.
The European Union recognizes that products vary greatly in their ‘risks’ to the users and the public. They have defined 6 essential requirements or characteristics which need to be addressed (by committee) and satisfied, when relevant, by the product prior to being put on the market.
Essential Requirements
- Mechanical resistance and stability
- Safety in the case of fire
- Hygiene, health and the environment
- Safety in use
- Protection against noise
- Energy economy and heat retention
- Sustainable use of natural resources
|
Product family \ Product \ Intended use |
Technical specifications |
|
Flat glass, profiled glass and glass- block products (4/6) / Glass-block / for use as anti-bullet or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Flat or curved glass panels / for use as anti- bullet, or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Insulating glass units / for use as anti-bullet, or anti-explosion glazing, Flat glass, profiled glass and glass-block products (4/6) / Glass- block wall panels / for use as anti- bullet or anti-explosion glazing |
EN 1036-2:2008 EN 1051-2-2007 EN 1051-2:2007 EN 1096-4:2018 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 1279-5:2018 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 15681-2:2017 EN 15682-2:2013 EN 15683-2:2013 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004 |
|
Curtain wallings (1/1) / Curtain wall kits / as external walls subject to reaction to fire requirements |
EN 13830:2003 |
|
Thermal insulating products (2/2) / Thermal insulating products (factory- made products and products intended to be formed in-situ) / for uses subject to regulations on reaction to fire |
EN 13162:2012 EN 13162:2012+A1:2015 EN 13163:2012 EN 13163:2012+A1:2015 EN 13164:2012 EN 13164:2012+A1:2015 EN 13165:2012 EN 13165:2012+A1:2015 EN 13165:2012+A2:2016 EN 13166:2012 EN 13166:2012+A1:2015 EN 13166:2012+A2:2016 EN 13167:2012 EN 13167:2012+A1:2015 EN 13168:2012 EN 13168:2012+A1:2015 EN 13169:2012 EN 13169:2012+A1:2015 EN 13170:2012 EN 13170:2012+A1:2015 EN 13171:2012 EN 13171:2012+A1:2015 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009+A1:2013 EN 14304:2009+A1:2013 EN 14305:2009+A1:2013 EN 14306:2009+A1:2013 EN 14307:2009+A1:2013 EN 14308:2009+A1:2013 EN 14309:2009+A1:2013 EN 14313:2009+A1:2013 EN 14314:2009+A1:2013 EN 14315-1:2013 EN 14318-1:2013 EN 14319-1:2013 EN 14320-1:2013 EN 14933:2007 EN 14934:2007 EN 15501:2013 EN 15732:2012 EN 16069:2012 EN 16069:2012+A1:2015 |
|
Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Doors and gates (with or without related hardware) / fire/smoke compartmentation and on escape routes, Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Building hardware related to doors, gates and windows / fire/smoke compartmentation and on escape routes, Doors, windows, shutters, blinds, gates and related building hardware (1/1) / Windows (with or without related hardware) / fire/smoke compartmentation and on escape routes |
EN 1125:2008 EN 1154:1996 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC: 2006 EN 1155:1996/A1:2002/AC: 2006 EN 1155:1997 EN 1155:1997/A1:2002 EN 1158:1997 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC: 2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 13241-1:2003+A1:2011 EN 13241:2003+A2:2016 EN 14351-1:2006+A1:2010 EN 14351-1:2006+A2:2016 EN 14846:2008 EN 16034:2014 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 |
| Technical Specification | Product Family, Product/Intended Use |
| EN 54-16:2008 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety). |
| EN 54-2:1997 | |
| EN 54-2:1997/A1:2006 | |
| EN 54-2:1997/AC:1999 | |
| EN 14604:2005 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety). |
| EN 14604:2005/AC:2008 | |
| EN 54-23:2010 | |
| EN 54-3:2001/A1:2002 | |
| EN 54-3:2001/A2:2006 | |
| EN 54-4:1997 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety). |
| EN 54-4:1997/A1:2002 | |
| EN 54-4:1997/A2:2006 | |
| EN 54-4:1997/AC:1999 | |
| EN 54-10:2002 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety). |
| EN 54-10:2002/A1:2005 | |
| EN 54-12:2002 | |
| EN 54-12:2015 | |
| EN 54-20:2006 | |
| EN 54-20:2006/AC:2008 | |
| EN 54-5:2000/A1:2002 | |
| EN 54-7:2000/A1:2002 | |
| EN 54-7:2000/A2:2006 | |
| EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 |
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety). |
| EN 54-11:2001 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety). |
| EN 54-11:2001/A1:2005 | |
| EN 54-17:2005 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety). |
| EN 54-17:2005/AC:2007 | |
| EN 54-18:2005 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety). and explosion suppression products (1/1) : - Input/output devices (fire safety). |
| EN 54-18:2005/AC:2007 | |
| EN 54-24:2008 | |
| EN 54-25:2008 | |
| EN 54-25:2008/AC:2010 | |
| EN 54-25:2008/AC:2012 | |
| EN 54-20:2006 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Combined fire detection and fire alarm systems-kits (fire safety). |
| EN 54-20:2006/AC:2008 | |
| EN 54-21:2006 | Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm transmission routing devices (fire safety), Fire alarm systems-kits (fire safety). |
| EN 13830:2003 | Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements). |
| EN 1125:2008 | Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes). |
| EN 1154:1996/A1:2002 | |
| EN 1154:1996/A1:2002/AC:200 | |
| EN 1155:1996/A1:2002/AC:200 | |
| EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 |
|
| EN 1158:1997/A1:2002/AC:200 EN 12209:2003 | |
| EN 12209:2003/AC:2005 EN 14846:2008 |
|
| EN 179:2008 | |
| EN 1935:2002 | |
| EN 1935:2002/AC:2003 | |
| EN 13241:2003+A2:2016 | Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes). |
| EN 14351-1:2006+A2:2016 | |
| EN 16034:2014 | |
| EN 16034:2014 | Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (fire/smoke compartmentation and on escape routes). |
How we can help you reach global markets
Many manufacturers are interested in finding out if their existing European products will meet the North American requirements. Intertek offers the support you need to help identify where pitfalls may be present. This can open up new markets for European companies previously discouraged from entering the market because of poor service from other providers and complex requirements. Intertek keeps it simple, and helps you grow globally into new markets all over the world.
Related Links
Fact Sheet: CE Marking Certification
CE Certification is a declaration that a product meets all applicable legal provisions set by the European Union under the CE Marking requirements.
CE Marking Guides
Download Guides to CE Marking under the new Construction Products Directive:
The ETL Listed Mark is the fastest growing certification mark in North America, widely accepted by AHJs and building code officials.
The Warnock Hersey (WH) Mark has long been the building product industry's preferred certification mark, found on more than 6,500 products ranging from fire doors to plumbing and construction products.
