ASTM E488: Standard Test Method for Strength of Anchors in Concrete Elements
Standard: ASTM E488 - Standard Test Method for Strength of Anchors in Concrete Elements
Certification Required: IAS Accreditation
Scope: This test method assesses the tensile and shear strength of post-installed and cast-in-place anchors in cracked or uncracked concrete.
Applicable Products: Intended use for post-installed and cast-in-place anchors installed perpendicular to a place surface
Test Procedure: For field testing; A 5% pre-load will be applied in the designated test direction prior to the test load to bring all members into full bearing. Each test load will be applied gradually during a time of approximately 30 seconds. The desired test load will be held for a period of 10 seconds, released, and test area inspected for damage.
End Result: To assess for failure methods including Pullout or disfiguration of the anchor, cracking of concrete surrounding the anchor, fracture of any component including hardware and accessories.
